Three-in-one mode is adopted: reducer, motor and brake form an integrated gear motor.
制动器采用平面弹簧加压电磁制动，制动率182%，快速刹车为0.03s至0.05s，快速刹车锁紧值<5cm，非石棉物刹车盘干式摩擦，整体刹车制动器配置钛质盖板防止潮湿刹车失灵，可保全天满负荷运转工作。快速制动整流器输入电压270VAC 50/60Hz，绝缘耐压1800VAC 50Hz 1min，刹车100万次寿命。
The brake adopts flat spring-loaded electromagnetic brake.Its braking rate is 182%, and quick brake time is 0.03s to 0.05s. The fast brake locking value is less than 5cm.With the non-asbestos brake disc dry friction, the overall brake is equipped with titanium cover plate to prevent the damp brake from malfunctioning, which can keep working at full load all day. The input voltage of the fast brake rectifier is 270VAC 50/60Hz, the insulation withstand voltage is 1800VAC 50Hz 1min, and the service life is 1 million times.
The motor adopts aluminum alloy hot high-pressure casting, all copper wire copper enameled wire through deep dipping, insulation class F, protection class IP55, working system S1 operation, moisture-proof and dust-proof fully sealed. Suitable for outdoor working environment +80 ℃ to -25 ℃, and not suitable for direct corrosion of objects, the motor power is more than 1.2 times the national standard value.
The special reducer (reduction motor) uses 20CrMnTi gear steel, which is carburized to ensure the hard tooth surface and strength, and is processed by CNC precision grinding to ensure the technical requirements of gear hardness and accuracy. Reducer load operation noise is less than 52dB (A), fully sealed and no oil leakage, maintenance-free and zero-fault design method is adopted, and the service life is 30 years.